/* Various utility functions. Copyright (C) 2005 Free Software Foundation, Inc. This file is part of GNU Wget. GNU Wget is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. GNU Wget is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with Wget; if not, write to the Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. In addition, as a special exception, the Free Software Foundation gives permission to link the code of its release of Wget with the OpenSSL project's "OpenSSL" library (or with modified versions of it that use the same license as the "OpenSSL" library), and distribute the linked executables. You must obey the GNU General Public License in all respects for all of the code used other than "OpenSSL". If you modify this file, you may extend this exception to your version of the file, but you are not obligated to do so. If you do not wish to do so, delete this exception statement from your version. */ #include #include #include #ifdef HAVE_STRING_H # include #else /* not HAVE_STRING_H */ # include #endif /* not HAVE_STRING_H */ #include #ifdef HAVE_UNISTD_H # include #endif #ifdef HAVE_MMAP # include #endif #ifdef HAVE_PWD_H # include #endif #ifdef HAVE_LIMITS_H # include #endif #ifdef HAVE_UTIME_H # include #endif #ifdef HAVE_SYS_UTIME_H # include #endif #include #ifdef NeXT # include /* for access() */ #endif #include #include #ifdef WGET_USE_STDARG # include #else # include #endif /* For TIOCGWINSZ and friends: */ #ifdef HAVE_SYS_IOCTL_H # include #endif #ifdef HAVE_TERMIOS_H # include #endif /* Needed for run_with_timeout. */ #undef USE_SIGNAL_TIMEOUT #ifdef HAVE_SIGNAL_H # include #endif #ifdef HAVE_SETJMP_H # include #endif #ifndef HAVE_SIGSETJMP /* If sigsetjmp is a macro, configure won't pick it up. */ # ifdef sigsetjmp # define HAVE_SIGSETJMP # endif #endif #ifdef HAVE_SIGNAL # ifdef HAVE_SIGSETJMP # define USE_SIGNAL_TIMEOUT # endif # ifdef HAVE_SIGBLOCK # define USE_SIGNAL_TIMEOUT # endif #endif #include "wget.h" #include "utils.h" #include "hash.h" #ifndef errno extern int errno; #endif /* Utility function: like xstrdup(), but also lowercases S. */ char * xstrdup_lower (const char *s) { char *copy = xstrdup (s); char *p = copy; for (; *p; p++) *p = TOLOWER (*p); return copy; } /* Copy the string formed by two pointers (one on the beginning, other on the char after the last char) to a new, malloc-ed location. 0-terminate it. */ char * strdupdelim (const char *beg, const char *end) { char *res = (char *)xmalloc (end - beg + 1); memcpy (res, beg, end - beg); res[end - beg] = '\0'; return res; } /* Parse a string containing comma-separated elements, and return a vector of char pointers with the elements. Spaces following the commas are ignored. */ char ** sepstring (const char *s) { char **res; const char *p; int i = 0; if (!s || !*s) return NULL; res = NULL; p = s; while (*s) { if (*s == ',') { res = (char **)xrealloc (res, (i + 2) * sizeof (char *)); res[i] = strdupdelim (p, s); res[++i] = NULL; ++s; /* Skip the blanks following the ','. */ while (ISSPACE (*s)) ++s; p = s; } else ++s; } res = (char **)xrealloc (res, (i + 2) * sizeof (char *)); res[i] = strdupdelim (p, s); res[i + 1] = NULL; return res; } #ifdef WGET_USE_STDARG # define VA_START(args, arg1) va_start (args, arg1) #else # define VA_START(args, ignored) va_start (args) #endif /* Like sprintf, but allocates a string of sufficient size with malloc and returns it. GNU libc has a similar function named asprintf, which requires the pointer to the string to be passed. */ char * aprintf (const char *fmt, ...) { /* This function is implemented using vsnprintf, which we provide for the systems that don't have it. Therefore, it should be 100% portable. */ int size = 32; char *str = xmalloc (size); while (1) { int n; va_list args; /* See log_vprintf_internal for explanation why it's OK to rely on the return value of vsnprintf. */ VA_START (args, fmt); n = vsnprintf (str, size, fmt, args); va_end (args); /* If the printing worked, return the string. */ if (n > -1 && n < size) return str; /* Else try again with a larger buffer. */ if (n > -1) /* C99 */ size = n + 1; /* precisely what is needed */ else size <<= 1; /* twice the old size */ str = xrealloc (str, size); } } /* Concatenate the NULL-terminated list of string arguments into freshly allocated space. */ char * concat_strings (const char *str0, ...) { va_list args; int saved_lengths[5]; /* inspired by Apache's apr_pstrcat */ char *ret, *p; const char *next_str; int total_length = 0; int argcount; /* Calculate the length of and allocate the resulting string. */ argcount = 0; VA_START (args, str0); for (next_str = str0; next_str != NULL; next_str = va_arg (args, char *)) { int len = strlen (next_str); if (argcount < countof (saved_lengths)) saved_lengths[argcount++] = len; total_length += len; } va_end (args); p = ret = xmalloc (total_length + 1); /* Copy the strings into the allocated space. */ argcount = 0; VA_START (args, str0); for (next_str = str0; next_str != NULL; next_str = va_arg (args, char *)) { int len; if (argcount < countof (saved_lengths)) len = saved_lengths[argcount++]; else len = strlen (next_str); memcpy (p, next_str, len); p += len; } va_end (args); *p = '\0'; return ret; } /* Return pointer to a static char[] buffer in which zero-terminated string-representation of TM (in form hh:mm:ss) is printed. If TM is NULL, the current time will be used. */ char * time_str (time_t *tm) { static char output[15]; struct tm *ptm; time_t secs = tm ? *tm : time (NULL); if (secs == -1) { /* In case of error, return the empty string. Maybe we should just abort if this happens? */ *output = '\0'; return output; } ptm = localtime (&secs); sprintf (output, "%02d:%02d:%02d", ptm->tm_hour, ptm->tm_min, ptm->tm_sec); return output; } /* Like the above, but include the date: YYYY-MM-DD hh:mm:ss. */ char * datetime_str (time_t *tm) { static char output[20]; /* "YYYY-MM-DD hh:mm:ss" + \0 */ struct tm *ptm; time_t secs = tm ? *tm : time (NULL); if (secs == -1) { /* In case of error, return the empty string. Maybe we should just abort if this happens? */ *output = '\0'; return output; } ptm = localtime (&secs); sprintf (output, "%04d-%02d-%02d %02d:%02d:%02d", ptm->tm_year + 1900, ptm->tm_mon + 1, ptm->tm_mday, ptm->tm_hour, ptm->tm_min, ptm->tm_sec); return output; } /* The Windows versions of the following two functions are defined in mswindows.c. */ #ifndef WINDOWS void fork_to_background (void) { pid_t pid; /* Whether we arrange our own version of opt.lfilename here. */ int logfile_changed = 0; if (!opt.lfilename) { /* We must create the file immediately to avoid either a race condition (which arises from using unique_name and failing to use fopen_excl) or lying to the user about the log file name (which arises from using unique_name, printing the name, and using fopen_excl later on.) */ FILE *new_log_fp = unique_create (DEFAULT_LOGFILE, 0, &opt.lfilename); if (new_log_fp) { logfile_changed = 1; fclose (new_log_fp); } } pid = fork (); if (pid < 0) { /* parent, error */ perror ("fork"); exit (1); } else if (pid != 0) { /* parent, no error */ printf (_("Continuing in background, pid %d.\n"), (int)pid); if (logfile_changed) printf (_("Output will be written to `%s'.\n"), opt.lfilename); exit (0); /* #### should we use _exit()? */ } /* child: give up the privileges and keep running. */ setsid (); freopen ("/dev/null", "r", stdin); freopen ("/dev/null", "w", stdout); freopen ("/dev/null", "w", stderr); } #endif /* not WINDOWS */ /* "Touch" FILE, i.e. make its mtime ("modified time") equal the time specified with TM. The atime ("access time") is set to the current time. */ void touch (const char *file, time_t tm) { #ifdef HAVE_STRUCT_UTIMBUF struct utimbuf times; #else struct { time_t actime; time_t modtime; } times; #endif times.modtime = tm; times.actime = time (NULL); if (utime (file, ×) == -1) logprintf (LOG_NOTQUIET, "utime(%s): %s\n", file, strerror (errno)); } /* Checks if FILE is a symbolic link, and removes it if it is. Does nothing under MS-Windows. */ int remove_link (const char *file) { int err = 0; struct_stat st; if (lstat (file, &st) == 0 && S_ISLNK (st.st_mode)) { DEBUGP (("Unlinking %s (symlink).\n", file)); err = unlink (file); if (err != 0) logprintf (LOG_VERBOSE, _("Failed to unlink symlink `%s': %s\n"), file, strerror (errno)); } return err; } /* Does FILENAME exist? This is quite a lousy implementation, since it supplies no error codes -- only a yes-or-no answer. Thus it will return that a file does not exist if, e.g., the directory is unreadable. I don't mind it too much currently, though. The proper way should, of course, be to have a third, error state, other than true/false, but that would introduce uncalled-for additional complexity to the callers. */ int file_exists_p (const char *filename) { #ifdef HAVE_ACCESS return access (filename, F_OK) >= 0; #else struct_stat buf; return stat (filename, &buf) >= 0; #endif } /* Returns 0 if PATH is a directory, 1 otherwise (any kind of file). Returns 0 on error. */ int file_non_directory_p (const char *path) { struct_stat buf; /* Use lstat() rather than stat() so that symbolic links pointing to directories can be identified correctly. */ if (lstat (path, &buf) != 0) return 0; return S_ISDIR (buf.st_mode) ? 0 : 1; } /* Return the size of file named by FILENAME, or -1 if it cannot be opened or seeked into. */ wgint file_size (const char *filename) { #if defined(HAVE_FSEEKO) && defined(HAVE_FTELLO) wgint size; /* We use fseek rather than stat to determine the file size because that way we can also verify that the file is readable without explicitly checking for permissions. Inspired by the POST patch by Arnaud Wylie. */ FILE *fp = fopen (filename, "rb"); if (!fp) return -1; fseeko (fp, 0, SEEK_END); size = ftello (fp); fclose (fp); return size; #else struct_stat st; if (stat (filename, &st) < 0) return -1; return st.st_size; #endif } /* stat file names named PREFIX.1, PREFIX.2, etc., until one that doesn't exist is found. Return a freshly allocated copy of the unused file name. */ static char * unique_name_1 (const char *prefix) { int count = 1; int plen = strlen (prefix); char *template = (char *)alloca (plen + 1 + 24); char *template_tail = template + plen; memcpy (template, prefix, plen); *template_tail++ = '.'; do number_to_string (template_tail, count++); while (file_exists_p (template)); return xstrdup (template); } /* Return a unique file name, based on FILE. More precisely, if FILE doesn't exist, it is returned unmodified. If not, FILE.1 is tried, then FILE.2, etc. The first FILE. file name that doesn't exist is returned. The resulting file is not created, only verified that it didn't exist at the point in time when the function was called. Therefore, where security matters, don't rely that the file created by this function exists until you open it with O_EXCL or equivalent. If ALLOW_PASSTHROUGH is 0, it always returns a freshly allocated string. Otherwise, it may return FILE if the file doesn't exist (and therefore doesn't need changing). */ char * unique_name (const char *file, int allow_passthrough) { /* If the FILE itself doesn't exist, return it without modification. */ if (!file_exists_p (file)) return allow_passthrough ? (char *)file : xstrdup (file); /* Otherwise, find a numeric suffix that results in unused file name and return it. */ return unique_name_1 (file); } /* Create a file based on NAME, except without overwriting an existing file with that name. Providing O_EXCL is correctly implemented, this function does not have the race condition associated with opening the file returned by unique_name. */ FILE * unique_create (const char *name, int binary, char **opened_name) { /* unique file name, based on NAME */ char *uname = unique_name (name, 0); FILE *fp; while ((fp = fopen_excl (uname, binary)) == NULL && errno == EEXIST) { xfree (uname); uname = unique_name (name, 0); } if (opened_name && fp != NULL) { if (fp) *opened_name = uname; else { *opened_name = NULL; xfree (uname); } } else xfree (uname); return fp; } /* Open the file for writing, with the addition that the file is opened "exclusively". This means that, if the file already exists, this function will *fail* and errno will be set to EEXIST. If BINARY is set, the file will be opened in binary mode, equivalent to fopen's "wb". If opening the file fails for any reason, including the file having previously existed, this function returns NULL and sets errno appropriately. */ FILE * fopen_excl (const char *fname, int binary) { int fd; #ifdef O_EXCL int flags = O_WRONLY | O_CREAT | O_EXCL; # ifdef O_BINARY if (binary) flags |= O_BINARY; # endif fd = open (fname, flags, 0666); if (fd < 0) return NULL; return fdopen (fd, binary ? "wb" : "w"); #else /* not O_EXCL */ /* Manually check whether the file exists. This is prone to race conditions, but systems without O_EXCL haven't deserved better. */ if (file_exists_p (fname)) { errno = EEXIST; return NULL; } return fopen (fname, binary ? "wb" : "w"); #endif /* not O_EXCL */ } /* Create DIRECTORY. If some of the pathname components of DIRECTORY are missing, create them first. In case any mkdir() call fails, return its error status. Returns 0 on successful completion. The behaviour of this function should be identical to the behaviour of `mkdir -p' on systems where mkdir supports the `-p' option. */ int make_directory (const char *directory) { int i, ret, quit = 0; char *dir; /* Make a copy of dir, to be able to write to it. Otherwise, the function is unsafe if called with a read-only char *argument. */ STRDUP_ALLOCA (dir, directory); /* If the first character of dir is '/', skip it (and thus enable creation of absolute-pathname directories. */ for (i = (*dir == '/'); 1; ++i) { for (; dir[i] && dir[i] != '/'; i++) ; if (!dir[i]) quit = 1; dir[i] = '\0'; /* Check whether the directory already exists. Allow creation of of intermediate directories to fail, as the initial path components are not necessarily directories! */ if (!file_exists_p (dir)) ret = mkdir (dir, 0777); else ret = 0; if (quit) break; else dir[i] = '/'; } return ret; } /* Merge BASE with FILE. BASE can be a directory or a file name, FILE should be a file name. file_merge("/foo/bar", "baz") => "/foo/baz" file_merge("/foo/bar/", "baz") => "/foo/bar/baz" file_merge("foo", "bar") => "bar" In other words, it's a simpler and gentler version of uri_merge_1. */ char * file_merge (const char *base, const char *file) { char *result; const char *cut = (const char *)strrchr (base, '/'); if (!cut) return xstrdup (file); result = (char *)xmalloc (cut - base + 1 + strlen (file) + 1); memcpy (result, base, cut - base); result[cut - base] = '/'; strcpy (result + (cut - base) + 1, file); return result; } static int in_acclist PARAMS ((const char *const *, const char *, int)); /* Determine whether a file is acceptable to be followed, according to lists of patterns to accept/reject. */ int acceptable (const char *s) { int l = strlen (s); while (l && s[l] != '/') --l; if (s[l] == '/') s += (l + 1); if (opt.accepts) { if (opt.rejects) return (in_acclist ((const char *const *)opt.accepts, s, 1) && !in_acclist ((const char *const *)opt.rejects, s, 1)); else return in_acclist ((const char *const *)opt.accepts, s, 1); } else if (opt.rejects) return !in_acclist ((const char *const *)opt.rejects, s, 1); return 1; } /* Compare S1 and S2 frontally; S2 must begin with S1. E.g. if S1 is `/something', frontcmp() will return 1 only if S2 begins with `/something'. Otherwise, 0 is returned. */ int frontcmp (const char *s1, const char *s2) { for (; *s1 && *s2 && (*s1 == *s2); ++s1, ++s2); return !*s1; } /* Iterate through STRLIST, and return the first element that matches S, through wildcards or front comparison (as appropriate). */ static char * proclist (char **strlist, const char *s, enum accd flags) { char **x; for (x = strlist; *x; x++) { /* Remove leading '/' if ALLABS */ char *p = *x + ((flags & ALLABS) && (**x == '/')); if (has_wildcards_p (p)) { if (fnmatch (p, s, FNM_PATHNAME) == 0) break; } else { if (frontcmp (p, s)) break; } } return *x; } /* Returns whether DIRECTORY is acceptable for download, wrt the include/exclude lists. If FLAGS is ALLABS, the leading `/' is ignored in paths; relative and absolute paths may be freely intermixed. */ int accdir (const char *directory, enum accd flags) { /* Remove starting '/'. */ if (flags & ALLABS && *directory == '/') ++directory; if (opt.includes) { if (!proclist (opt.includes, directory, flags)) return 0; } if (opt.excludes) { if (proclist (opt.excludes, directory, flags)) return 0; } return 1; } /* Return non-zero if STRING ends with TAIL. For instance: match_tail ("abc", "bc", 0) -> 1 match_tail ("abc", "ab", 0) -> 0 match_tail ("abc", "abc", 0) -> 1 If FOLD_CASE_P is non-zero, the comparison will be case-insensitive. */ int match_tail (const char *string, const char *tail, int fold_case_p) { int i, j; /* We want this to be fast, so we code two loops, one with case-folding, one without. */ if (!fold_case_p) { for (i = strlen (string), j = strlen (tail); i >= 0 && j >= 0; i--, j--) if (string[i] != tail[j]) break; } else { for (i = strlen (string), j = strlen (tail); i >= 0 && j >= 0; i--, j--) if (TOLOWER (string[i]) != TOLOWER (tail[j])) break; } /* If the tail was exhausted, the match was succesful. */ if (j == -1) return 1; else return 0; } /* Checks whether string S matches each element of ACCEPTS. A list element are matched either with fnmatch() or match_tail(), according to whether the element contains wildcards or not. If the BACKWARD is 0, don't do backward comparison -- just compare them normally. */ static int in_acclist (const char *const *accepts, const char *s, int backward) { for (; *accepts; accepts++) { if (has_wildcards_p (*accepts)) { /* fnmatch returns 0 if the pattern *does* match the string. */ if (fnmatch (*accepts, s, 0) == 0) return 1; } else { if (backward) { if (match_tail (s, *accepts, 0)) return 1; } else { if (!strcmp (s, *accepts)) return 1; } } } return 0; } /* Return the location of STR's suffix (file extension). Examples: suffix ("foo.bar") -> "bar" suffix ("foo.bar.baz") -> "baz" suffix ("/foo/bar") -> NULL suffix ("/foo.bar/baz") -> NULL */ char * suffix (const char *str) { int i; for (i = strlen (str); i && str[i] != '/' && str[i] != '.'; i--) ; if (str[i++] == '.') return (char *)str + i; else return NULL; } /* Return non-zero if S contains globbing wildcards (`*', `?', `[' or `]'). */ int has_wildcards_p (const char *s) { for (; *s; s++) if (*s == '*' || *s == '?' || *s == '[' || *s == ']') return 1; return 0; } /* Return non-zero if FNAME ends with a typical HTML suffix. The following (case-insensitive) suffixes are presumed to be HTML files: html htm ?html (`?' matches one character) #### CAVEAT. This is not necessarily a good indication that FNAME refers to a file that contains HTML! */ int has_html_suffix_p (const char *fname) { char *suf; if ((suf = suffix (fname)) == NULL) return 0; if (!strcasecmp (suf, "html")) return 1; if (!strcasecmp (suf, "htm")) return 1; if (suf[0] && !strcasecmp (suf + 1, "html")) return 1; return 0; } /* Read a line from FP and return the pointer to freshly allocated storage. The storage space is obtained through malloc() and should be freed with free() when it is no longer needed. The length of the line is not limited, except by available memory. The newline character at the end of line is retained. The line is terminated with a zero character. After end-of-file is encountered without anything being read, NULL is returned. NULL is also returned on error. To distinguish between these two cases, use the stdio function ferror(). */ char * read_whole_line (FILE *fp) { int length = 0; int bufsize = 82; char *line = (char *)xmalloc (bufsize); while (fgets (line + length, bufsize - length, fp)) { length += strlen (line + length); if (length == 0) /* Possible for example when reading from a binary file where a line begins with \0. */ continue; if (line[length - 1] == '\n') break; /* fgets() guarantees to read the whole line, or to use up the space we've given it. We can double the buffer unconditionally. */ bufsize <<= 1; line = xrealloc (line, bufsize); } if (length == 0 || ferror (fp)) { xfree (line); return NULL; } if (length + 1 < bufsize) /* Relieve the memory from our exponential greediness. We say `length + 1' because the terminating \0 is not included in LENGTH. We don't need to zero-terminate the string ourselves, though, because fgets() does that. */ line = xrealloc (line, length + 1); return line; } /* Read FILE into memory. A pointer to `struct file_memory' are returned; use struct element `content' to access file contents, and the element `length' to know the file length. `content' is *not* zero-terminated, and you should *not* read or write beyond the [0, length) range of characters. After you are done with the file contents, call read_file_free to release the memory. Depending on the operating system and the type of file that is being read, read_file() either mmap's the file into memory, or reads the file into the core using read(). If file is named "-", fileno(stdin) is used for reading instead. If you want to read from a real file named "-", use "./-" instead. */ struct file_memory * read_file (const char *file) { int fd; struct file_memory *fm; long size; int inhibit_close = 0; /* Some magic in the finest tradition of Perl and its kin: if FILE is "-", just use stdin. */ if (HYPHENP (file)) { fd = fileno (stdin); inhibit_close = 1; /* Note that we don't inhibit mmap() in this case. If stdin is redirected from a regular file, mmap() will still work. */ } else fd = open (file, O_RDONLY); if (fd < 0) return NULL; fm = xnew (struct file_memory); #ifdef HAVE_MMAP { struct_stat buf; if (fstat (fd, &buf) < 0) goto mmap_lose; fm->length = buf.st_size; /* NOTE: As far as I know, the callers of this function never modify the file text. Relying on this would enable us to specify PROT_READ and MAP_SHARED for a marginal gain in efficiency, but at some cost to generality. */ fm->content = mmap (NULL, fm->length, PROT_READ | PROT_WRITE, MAP_PRIVATE, fd, 0); if (fm->content == (char *)MAP_FAILED) goto mmap_lose; if (!inhibit_close) close (fd); fm->mmap_p = 1; return fm; } mmap_lose: /* The most common reason why mmap() fails is that FD does not point to a plain file. However, it's also possible that mmap() doesn't work for a particular type of file. Therefore, whenever mmap() fails, we just fall back to the regular method. */ #endif /* HAVE_MMAP */ fm->length = 0; size = 512; /* number of bytes fm->contents can hold at any given time. */ fm->content = xmalloc (size); while (1) { wgint nread; if (fm->length > size / 2) { /* #### I'm not sure whether the whole exponential-growth thing makes sense with kernel read. On Linux at least, read() refuses to read more than 4K from a file at a single chunk anyway. But other Unixes might optimize it better, and it doesn't *hurt* anything, so I'm leaving it. */ /* Normally, we grow SIZE exponentially to make the number of calls to read() and realloc() logarithmic in relation to file size. However, read() can read an amount of data smaller than requested, and it would be unreasonable to double SIZE every time *something* was read. Therefore, we double SIZE only when the length exceeds half of the entire allocated size. */ size <<= 1; fm->content = xrealloc (fm->content, size); } nread = read (fd, fm->content + fm->length, size - fm->length); if (nread > 0) /* Successful read. */ fm->length += nread; else if (nread < 0) /* Error. */ goto lose; else /* EOF */ break; } if (!inhibit_close) close (fd); if (size > fm->length && fm->length != 0) /* Due to exponential growth of fm->content, the allocated region might be much larger than what is actually needed. */ fm->content = xrealloc (fm->content, fm->length); fm->mmap_p = 0; return fm; lose: if (!inhibit_close) close (fd); xfree (fm->content); xfree (fm); return NULL; } /* Release the resources held by FM. Specifically, this calls munmap() or xfree() on fm->content, depending whether mmap or malloc/read were used to read in the file. It also frees the memory needed to hold the FM structure itself. */ void read_file_free (struct file_memory *fm) { #ifdef HAVE_MMAP if (fm->mmap_p) { munmap (fm->content, fm->length); } else #endif { xfree (fm->content); } xfree (fm); } /* Free the pointers in a NULL-terminated vector of pointers, then free the pointer itself. */ void free_vec (char **vec) { if (vec) { char **p = vec; while (*p) xfree (*p++); xfree (vec); } } /* Append vector V2 to vector V1. The function frees V2 and reallocates V1 (thus you may not use the contents of neither pointer after the call). If V1 is NULL, V2 is returned. */ char ** merge_vecs (char **v1, char **v2) { int i, j; if (!v1) return v2; if (!v2) return v1; if (!*v2) { /* To avoid j == 0 */ xfree (v2); return v1; } /* Count v1. */ for (i = 0; v1[i]; i++); /* Count v2. */ for (j = 0; v2[j]; j++); /* Reallocate v1. */ v1 = (char **)xrealloc (v1, (i + j + 1) * sizeof (char **)); memcpy (v1 + i, v2, (j + 1) * sizeof (char *)); xfree (v2); return v1; } /* Append a freshly allocated copy of STR to VEC. If VEC is NULL, it is allocated as needed. Return the new value of the vector. */ char ** vec_append (char **vec, const char *str) { int cnt; /* count of vector elements, including the one we're about to append */ if (vec != NULL) { for (cnt = 0; vec[cnt]; cnt++) ; ++cnt; } else cnt = 1; /* Reallocate the array to fit the new element and the NULL. */ vec = xrealloc (vec, (cnt + 1) * sizeof (char *)); /* Append a copy of STR to the vector. */ vec[cnt - 1] = xstrdup (str); vec[cnt] = NULL; return vec; } /* Sometimes it's useful to create "sets" of strings, i.e. special hash tables where you want to store strings as keys and merely query for their existence. Here is a set of utility routines that makes that transparent. */ void string_set_add (struct hash_table *ht, const char *s) { /* First check whether the set element already exists. If it does, do nothing so that we don't have to free() the old element and then strdup() a new one. */ if (hash_table_contains (ht, s)) return; /* We use "1" as value. It provides us a useful and clear arbitrary value, and it consumes no memory -- the pointers to the same string "1" will be shared by all the key-value pairs in all `set' hash tables. */ hash_table_put (ht, xstrdup (s), "1"); } /* Synonym for hash_table_contains... */ int string_set_contains (struct hash_table *ht, const char *s) { return hash_table_contains (ht, s); } static int string_set_to_array_mapper (void *key, void *value_ignored, void *arg) { char ***arrayptr = (char ***) arg; *(*arrayptr)++ = (char *) key; return 0; } /* Convert the specified string set to array. ARRAY should be large enough to hold hash_table_count(ht) char pointers. */ void string_set_to_array (struct hash_table *ht, char **array) { hash_table_map (ht, string_set_to_array_mapper, &array); } static int string_set_free_mapper (void *key, void *value_ignored, void *arg_ignored) { xfree (key); return 0; } void string_set_free (struct hash_table *ht) { hash_table_map (ht, string_set_free_mapper, NULL); hash_table_destroy (ht); } static int free_keys_and_values_mapper (void *key, void *value, void *arg_ignored) { xfree (key); xfree (value); return 0; } /* Another utility function: call free() on all keys and values of HT. */ void free_keys_and_values (struct hash_table *ht) { hash_table_map (ht, free_keys_and_values_mapper, NULL); } /* Add thousand separators to a number already in string form. Used by with_thousand_seps and with_thousand_seps_large. */ static char * add_thousand_seps (const char *repr) { static char outbuf[48]; int i, i1, mod; char *outptr; const char *inptr; /* Reset the pointers. */ outptr = outbuf; inptr = repr; /* Ignore the sign for the purpose of adding thousand separators. */ if (*inptr == '-') { *outptr++ = '-'; ++inptr; } /* How many digits before the first separator? */ mod = strlen (inptr) % 3; /* Insert them. */ for (i = 0; i < mod; i++) *outptr++ = inptr[i]; /* Now insert the rest of them, putting separator before every third digit. */ for (i1 = i, i = 0; inptr[i1]; i++, i1++) { if (i % 3 == 0 && i1 != 0) *outptr++ = ','; *outptr++ = inptr[i1]; } /* Zero-terminate the string. */ *outptr = '\0'; return outbuf; } /* Return a static pointer to the number printed with thousand separators inserted at the right places. */ char * with_thousand_seps (wgint l) { char inbuf[24]; /* Print the number into the buffer. */ number_to_string (inbuf, l); return add_thousand_seps (inbuf); } /* Write a string representation of LARGE_INT NUMBER into the provided buffer. It would be dangerous to use sprintf, because the code wouldn't work on a machine with gcc-provided long long support, but without libc support for "%lld". However, such old systems platforms typically lack snprintf and will end up using our version, which does support "%lld" whereever long longs are available. */ static void large_int_to_string (char *buffer, int bufsize, LARGE_INT number) { snprintf (buffer, bufsize, LARGE_INT_FMT, number); } /* The same as with_thousand_seps, but works on LARGE_INT. */ char * with_thousand_seps_large (LARGE_INT l) { char inbuf[48]; large_int_to_string (inbuf, sizeof (inbuf), l); return add_thousand_seps (inbuf); } /* N, a byte quantity, is converted to a human-readable abberviated form a la sizes printed by `ls -lh'. The result is written to a static buffer, a pointer to which is returned. Unlike `with_thousand_seps', this approximates to the nearest unit. Quoting GNU libit: "Most people visually process strings of 3-4 digits effectively, but longer strings of digits are more prone to misinterpretation. Hence, converting to an abbreviated form usually improves readability." This intentionally uses kilobyte (KB), megabyte (MB), etc. in their original computer science meaning of "powers of 1024". Powers of 1000 would be useless since Wget already displays sizes with thousand separators. We don't use the "*bibyte" names invented in 1998, and seldom used in practice. Wikipedia's entry on kilobyte discusses this in some detail. */ char * human_readable (wgint n) { /* These suffixes are compatible with those of GNU `ls -lh'. */ static char powers[] = { 'K', /* kilobyte, 2^10 bytes */ 'M', /* megabyte, 2^20 bytes */ 'G', /* gigabyte, 2^30 bytes */ 'T', /* terabyte, 2^40 bytes */ 'P', /* petabyte, 2^50 bytes */ 'E', /* exabyte, 2^60 bytes */ }; static char buf[8]; int i; /* If the quantity is smaller than 1K, just print it. */ if (n < 1024) { snprintf (buf, sizeof (buf), "%d", (int) n); return buf; } /* Loop over powers, dividing N with 1024 in each iteration. This works unchanged for all sizes of wgint, while still avoiding non-portable `long double' arithmetic. */ for (i = 0; i < countof (powers); i++) { /* At each iteration N is greater than the *subsequent* power. That way N/1024.0 produces a decimal number in the units of *this* power. */ if ((n >> 10) < 1024 || i == countof (powers) - 1) { /* Must cast to long first because MS VC can't directly cast __int64 to double. (This is safe because N is known to be <2**20.) */ double val = (double) (long) n / 1024.0; /* Print values smaller than 10 with one decimal digits, and others without any decimals. */ snprintf (buf, sizeof (buf), "%.*f%c", val < 10 ? 1 : 0, val, powers[i]); return buf; } n >>= 10; } return NULL; /* unreached */ } /* Count the digits in the provided number. Used to allocate space when printing numbers. */ int numdigit (wgint number) { int cnt = 1; if (number < 0) ++cnt; /* accomodate '-' */ while ((number /= 10) != 0) ++cnt; return cnt; } #define PR(mask) *p++ = n / (mask) + '0' /* DIGITS_ is used to print a D-digit number and should be called with mask==10^(D-1). It prints n/mask (the first digit), reducing n to n%mask (the remaining digits), and calling DIGITS_. Recursively this continues until DIGITS_1 is invoked. */ #define DIGITS_1(mask) PR (mask) #define DIGITS_2(mask) PR (mask), n %= (mask), DIGITS_1 ((mask) / 10) #define DIGITS_3(mask) PR (mask), n %= (mask), DIGITS_2 ((mask) / 10) #define DIGITS_4(mask) PR (mask), n %= (mask), DIGITS_3 ((mask) / 10) #define DIGITS_5(mask) PR (mask), n %= (mask), DIGITS_4 ((mask) / 10) #define DIGITS_6(mask) PR (mask), n %= (mask), DIGITS_5 ((mask) / 10) #define DIGITS_7(mask) PR (mask), n %= (mask), DIGITS_6 ((mask) / 10) #define DIGITS_8(mask) PR (mask), n %= (mask), DIGITS_7 ((mask) / 10) #define DIGITS_9(mask) PR (mask), n %= (mask), DIGITS_8 ((mask) / 10) #define DIGITS_10(mask) PR (mask), n %= (mask), DIGITS_9 ((mask) / 10) /* DIGITS_<11-20> are only used on machines with 64-bit wgints. */ #define DIGITS_11(mask) PR (mask), n %= (mask), DIGITS_10 ((mask) / 10) #define DIGITS_12(mask) PR (mask), n %= (mask), DIGITS_11 ((mask) / 10) #define DIGITS_13(mask) PR (mask), n %= (mask), DIGITS_12 ((mask) / 10) #define DIGITS_14(mask) PR (mask), n %= (mask), DIGITS_13 ((mask) / 10) #define DIGITS_15(mask) PR (mask), n %= (mask), DIGITS_14 ((mask) / 10) #define DIGITS_16(mask) PR (mask), n %= (mask), DIGITS_15 ((mask) / 10) #define DIGITS_17(mask) PR (mask), n %= (mask), DIGITS_16 ((mask) / 10) #define DIGITS_18(mask) PR (mask), n %= (mask), DIGITS_17 ((mask) / 10) #define DIGITS_19(mask) PR (mask), n %= (mask), DIGITS_18 ((mask) / 10) /* SPRINTF_WGINT is used by number_to_string to handle pathological cases and to portably support strange sizes of wgint. Ideally this would just use "%j" and intmax_t, but many systems don't support it, so it's used only if nothing else works. */ #if SIZEOF_LONG >= SIZEOF_WGINT # define SPRINTF_WGINT(buf, n) sprintf (buf, "%ld", (long) (n)) #else # if SIZEOF_LONG_LONG >= SIZEOF_WGINT # define SPRINTF_WGINT(buf, n) sprintf (buf, "%lld", (long long) (n)) # else # ifdef WINDOWS # define SPRINTF_WGINT(buf, n) sprintf (buf, "%I64", (__int64) (n)) # else # define SPRINTF_WGINT(buf, n) sprintf (buf, "%j", (intmax_t) (n)) # endif # endif #endif /* Shorthand for casting to wgint. */ #define W wgint /* Print NUMBER to BUFFER in base 10. This is equivalent to `sprintf(buffer, "%lld", (long long) number)', only typically much faster and portable to machines without long long. The speedup may make a difference in programs that frequently convert numbers to strings. Some implementations of sprintf, particularly the one in GNU libc, have been known to be extremely slow when converting integers to strings. Return the pointer to the location where the terminating zero was printed. (Equivalent to calling buffer+strlen(buffer) after the function is done.) BUFFER should be big enough to accept as many bytes as you expect the number to take up. On machines with 64-bit longs the maximum needed size is 24 bytes. That includes the digits needed for the largest 64-bit number, the `-' sign in case it's negative, and the terminating '\0'. */ char * number_to_string (char *buffer, wgint number) { char *p = buffer; wgint n = number; #if (SIZEOF_WGINT != 4) && (SIZEOF_WGINT != 8) /* We are running in a strange or misconfigured environment. Let sprintf cope with it. */ SPRINTF_WGINT (buffer, n); p += strlen (buffer); #else /* (SIZEOF_WGINT == 4) || (SIZEOF_WGINT == 8) */ if (n < 0) { if (n < -WGINT_MAX) { /* -n would overflow. Have sprintf deal with this. */ SPRINTF_WGINT (buffer, n); p += strlen (buffer); return p; } *p++ = '-'; n = -n; } /* Use the DIGITS_ macro appropriate for N's number of digits. That way printing any N is fully open-coded without a loop or jump. (Also see description of DIGITS_*.) */ if (n < 10) DIGITS_1 (1); else if (n < 100) DIGITS_2 (10); else if (n < 1000) DIGITS_3 (100); else if (n < 10000) DIGITS_4 (1000); else if (n < 100000) DIGITS_5 (10000); else if (n < 1000000) DIGITS_6 (100000); else if (n < 10000000) DIGITS_7 (1000000); else if (n < 100000000) DIGITS_8 (10000000); else if (n < 1000000000) DIGITS_9 (100000000); #if SIZEOF_WGINT == 4 /* wgint is 32 bits wide: no number has more than 10 digits. */ else DIGITS_10 (1000000000); #else /* wgint is 64 bits wide: handle numbers with more than 9 decimal digits. Constants are constructed by compile-time multiplication to avoid dealing with different notations for 64-bit constants (nnnL, nnnLL, and nnnI64, depending on the compiler). */ else if (n < 10*(W)1000000000) DIGITS_10 (1000000000); else if (n < 100*(W)1000000000) DIGITS_11 (10*(W)1000000000); else if (n < 1000*(W)1000000000) DIGITS_12 (100*(W)1000000000); else if (n < 10000*(W)1000000000) DIGITS_13 (1000*(W)1000000000); else if (n < 100000*(W)1000000000) DIGITS_14 (10000*(W)1000000000); else if (n < 1000000*(W)1000000000) DIGITS_15 (100000*(W)1000000000); else if (n < 10000000*(W)1000000000) DIGITS_16 (1000000*(W)1000000000); else if (n < 100000000*(W)1000000000) DIGITS_17 (10000000*(W)1000000000); else if (n < 1000000000*(W)1000000000) DIGITS_18 (100000000*(W)1000000000); else DIGITS_19 (1000000000*(W)1000000000); #endif *p = '\0'; #endif /* (SIZEOF_WGINT == 4) || (SIZEOF_WGINT == 8) */ return p; } #undef PR #undef W #undef DIGITS_1 #undef DIGITS_2 #undef DIGITS_3 #undef DIGITS_4 #undef DIGITS_5 #undef DIGITS_6 #undef DIGITS_7 #undef DIGITS_8 #undef DIGITS_9 #undef DIGITS_10 #undef DIGITS_11 #undef DIGITS_12 #undef DIGITS_13 #undef DIGITS_14 #undef DIGITS_15 #undef DIGITS_16 #undef DIGITS_17 #undef DIGITS_18 #undef DIGITS_19 #define RING_SIZE 3 /* Print NUMBER to a statically allocated string and return a pointer to the printed representation. This function is intended to be used in conjunction with printf. It is hard to portably print wgint values: a) you cannot use printf("%ld", number) because wgint can be long long on 32-bit machines with LFS. b) you cannot use printf("%lld", number) because NUMBER could be long on 32-bit machines without LFS, or on 64-bit machines, which do not require LFS. Also, Windows doesn't support %lld. c) you cannot use printf("%j", (int_max_t) number) because not all versions of printf support "%j", the most notable being the one on Windows. d) you cannot #define WGINT_FMT to the appropriate format and use printf(WGINT_FMT, number) because that would break translations for user-visible messages, such as printf("Downloaded: %d bytes\n", number). What you should use instead is printf("%s", number_to_static_string (number)). CAVEAT: since the function returns pointers to static data, you must be careful to copy its result before calling it again. However, to make it more useful with printf, the function maintains an internal ring of static buffers to return. That way things like printf("%s %s", number_to_static_string (num1), number_to_static_string (num2)) work as expected. Three buffers are currently used, which means that "%s %s %s" will work, but "%s %s %s %s" won't. If you need to print more than three wgints, bump the RING_SIZE (or rethink your message.) */ char * number_to_static_string (wgint number) { static char ring[RING_SIZE][24]; static int ringpos; char *buf = ring[ringpos]; number_to_string (buf, number); ringpos = (ringpos + 1) % RING_SIZE; return buf; } /* Determine the width of the terminal we're running on. If that's not possible, return 0. */ int determine_screen_width (void) { /* If there's a way to get the terminal size using POSIX tcgetattr(), somebody please tell me. */ #ifdef TIOCGWINSZ int fd; struct winsize wsz; if (opt.lfilename != NULL) return 0; fd = fileno (stderr); if (ioctl (fd, TIOCGWINSZ, &wsz) < 0) return 0; /* most likely ENOTTY */ return wsz.ws_col; #else /* not TIOCGWINSZ */ # ifdef WINDOWS CONSOLE_SCREEN_BUFFER_INFO csbi; if (!GetConsoleScreenBufferInfo (GetStdHandle (STD_ERROR_HANDLE), &csbi)) return 0; return csbi.dwSize.X; # else /* neither WINDOWS nor TIOCGWINSZ */ return 0; #endif /* neither WINDOWS nor TIOCGWINSZ */ #endif /* not TIOCGWINSZ */ } /* Return a random number between 0 and MAX-1, inclusive. If MAX is greater than the value of RAND_MAX+1 on the system, the returned value will be in the range [0, RAND_MAX]. This may be fixed in a future release. The random number generator is seeded automatically the first time it is called. This uses rand() for portability. It has been suggested that random() offers better randomness, but this is not required for Wget, so I chose to go for simplicity and use rand unconditionally. DO NOT use this for cryptographic purposes. It is only meant to be used in situations where quality of the random numbers returned doesn't really matter. */ int random_number (int max) { static int seeded; double bounded; int rnd; if (!seeded) { srand (time (NULL)); seeded = 1; } rnd = rand (); /* On systems that don't define RAND_MAX, assume it to be 2**15 - 1, and enforce that assumption by masking other bits. */ #ifndef RAND_MAX # define RAND_MAX 32767 rnd &= RAND_MAX; #endif /* This is equivalent to rand() % max, but uses the high-order bits for better randomness on architecture where rand() is implemented using a simple congruential generator. */ bounded = (double)max * rnd / (RAND_MAX + 1.0); return (int)bounded; } /* Return a random uniformly distributed floating point number in the [0, 1) range. The precision of returned numbers is 9 digits. Modify this to use erand48() where available! */ double random_float (void) { /* We can't rely on any specific value of RAND_MAX, but I'm pretty sure it's greater than 1000. */ int rnd1 = random_number (1000); int rnd2 = random_number (1000); int rnd3 = random_number (1000); return rnd1 / 1000.0 + rnd2 / 1000000.0 + rnd3 / 1000000000.0; } /* Implementation of run_with_timeout, a generic timeout-forcing routine for systems with Unix-like signal handling. */ #ifdef USE_SIGNAL_TIMEOUT # ifdef HAVE_SIGSETJMP # define SETJMP(env) sigsetjmp (env, 1) static sigjmp_buf run_with_timeout_env; static RETSIGTYPE abort_run_with_timeout (int sig) { assert (sig == SIGALRM); siglongjmp (run_with_timeout_env, -1); } # else /* not HAVE_SIGSETJMP */ # define SETJMP(env) setjmp (env) static jmp_buf run_with_timeout_env; static RETSIGTYPE abort_run_with_timeout (int sig) { assert (sig == SIGALRM); /* We don't have siglongjmp to preserve the set of blocked signals; if we longjumped out of the handler at this point, SIGALRM would remain blocked. We must unblock it manually. */ int mask = siggetmask (); mask &= ~sigmask (SIGALRM); sigsetmask (mask); /* Now it's safe to longjump. */ longjmp (run_with_timeout_env, -1); } # endif /* not HAVE_SIGSETJMP */ /* Arrange for SIGALRM to be delivered in TIMEOUT seconds. This uses setitimer where available, alarm otherwise. TIMEOUT should be non-zero. If the timeout value is so small that it would be rounded to zero, it is rounded to the least legal value instead (1us for setitimer, 1s for alarm). That ensures that SIGALRM will be delivered in all cases. */ static void alarm_set (double timeout) { #ifdef ITIMER_REAL /* Use the modern itimer interface. */ struct itimerval itv; xzero (itv); itv.it_value.tv_sec = (long) timeout; itv.it_value.tv_usec = 1000000 * (timeout - (long)timeout); if (itv.it_value.tv_sec == 0 && itv.it_value.tv_usec == 0) /* Ensure that we wait for at least the minimum interval. Specifying zero would mean "wait forever". */ itv.it_value.tv_usec = 1; setitimer (ITIMER_REAL, &itv, NULL); #else /* not ITIMER_REAL */ /* Use the old alarm() interface. */ int secs = (int) timeout; if (secs == 0) /* Round TIMEOUTs smaller than 1 to 1, not to zero. This is because alarm(0) means "never deliver the alarm", i.e. "wait forever", which is not what someone who specifies a 0.5s timeout would expect. */ secs = 1; alarm (secs); #endif /* not ITIMER_REAL */ } /* Cancel the alarm set with alarm_set. */ static void alarm_cancel (void) { #ifdef ITIMER_REAL struct itimerval disable; xzero (disable); setitimer (ITIMER_REAL, &disable, NULL); #else /* not ITIMER_REAL */ alarm (0); #endif /* not ITIMER_REAL */ } /* Call FUN(ARG), but don't allow it to run for more than TIMEOUT seconds. Returns non-zero if the function was interrupted with a timeout, zero otherwise. This works by setting up SIGALRM to be delivered in TIMEOUT seconds using setitimer() or alarm(). The timeout is enforced by longjumping out of the SIGALRM handler. This has several advantages compared to the traditional approach of relying on signals causing system calls to exit with EINTR: * The callback function is *forcibly* interrupted after the timeout expires, (almost) regardless of what it was doing and whether it was in a syscall. For example, a calculation that takes a long time is interrupted as reliably as an IO operation. * It works with both SYSV and BSD signals because it doesn't depend on the default setting of SA_RESTART. * It doesn't require special handler setup beyond a simple call to signal(). (It does use sigsetjmp/siglongjmp, but they're optional.) The only downside is that, if FUN allocates internal resources that are normally freed prior to exit from the functions, they will be lost in case of timeout. */ int run_with_timeout (double timeout, void (*fun) (void *), void *arg) { int saved_errno; if (timeout == 0) { fun (arg); return 0; } signal (SIGALRM, abort_run_with_timeout); if (SETJMP (run_with_timeout_env) != 0) { /* Longjumped out of FUN with a timeout. */ signal (SIGALRM, SIG_DFL); return 1; } alarm_set (timeout); fun (arg); /* Preserve errno in case alarm() or signal() modifies it. */ saved_errno = errno; alarm_cancel (); signal (SIGALRM, SIG_DFL); errno = saved_errno; return 0; } #else /* not USE_SIGNAL_TIMEOUT */ #ifndef WINDOWS /* A stub version of run_with_timeout that just calls FUN(ARG). Don't define it under Windows, because Windows has its own version of run_with_timeout that uses threads. */ int run_with_timeout (double timeout, void (*fun) (void *), void *arg) { fun (arg); return 0; } #endif /* not WINDOWS */ #endif /* not USE_SIGNAL_TIMEOUT */ #ifndef WINDOWS /* Sleep the specified amount of seconds. On machines without nanosleep(), this may sleep shorter if interrupted by signals. */ void xsleep (double seconds) { #ifdef HAVE_NANOSLEEP /* nanosleep is the preferred interface because it offers high accuracy and, more importantly, because it allows us to reliably restart receiving a signal such as SIGWINCH. (There was an actual Debian bug report about --limit-rate malfunctioning while the terminal was being resized.) */ struct timespec sleep, remaining; sleep.tv_sec = (long) seconds; sleep.tv_nsec = 1000000000 * (seconds - (long) seconds); while (nanosleep (&sleep, &remaining) < 0 && errno == EINTR) /* If nanosleep has been interrupted by a signal, adjust the sleeping period and return to sleep. */ sleep = remaining; #else /* not HAVE_NANOSLEEP */ #ifdef HAVE_USLEEP /* If usleep is available, use it in preference to select. */ if (seconds >= 1) { /* On some systems, usleep cannot handle values larger than 1,000,000. If the period is larger than that, use sleep first, then add usleep for subsecond accuracy. */ sleep (seconds); seconds -= (long) seconds; } usleep (seconds * 1000000); #else /* not HAVE_USLEEP */ #ifdef HAVE_SELECT /* Note that, although Windows supports select, this sleeping strategy doesn't work there because Winsock's select doesn't implement timeout when it is passed NULL pointers for all fd sets. (But it does work under Cygwin, which implements its own select.) */ struct timeval sleep; sleep.tv_sec = (long) seconds; sleep.tv_usec = 1000000 * (seconds - (long) seconds); select (0, NULL, NULL, NULL, &sleep); /* If select returns -1 and errno is EINTR, it means we were interrupted by a signal. But without knowing how long we've actually slept, we can't return to sleep. Using gettimeofday to track sleeps is slow and unreliable due to clock skew. */ #else /* not HAVE_SELECT */ sleep (seconds); #endif /* not HAVE_SELECT */ #endif /* not HAVE_USLEEP */ #endif /* not HAVE_NANOSLEEP */ } #endif /* not WINDOWS */ /* Encode the string STR of length LENGTH to base64 format and place it to B64STORE. The output will be \0-terminated, and must point to a writable buffer of at least 1+BASE64_LENGTH(length) bytes. It returns the length of the resulting base64 data, not counting the terminating zero. This implementation will not emit newlines after 76 characters of base64 data. */ int base64_encode (const char *str, int length, char *b64store) { /* Conversion table. */ static char tbl[64] = { 'A','B','C','D','E','F','G','H', 'I','J','K','L','M','N','O','P', 'Q','R','S','T','U','V','W','X', 'Y','Z','a','b','c','d','e','f', 'g','h','i','j','k','l','m','n', 'o','p','q','r','s','t','u','v', 'w','x','y','z','0','1','2','3', '4','5','6','7','8','9','+','/' }; int i; const unsigned char *s = (const unsigned char *) str; char *p = b64store; /* Transform the 3x8 bits to 4x6 bits, as required by base64. */ for (i = 0; i < length; i += 3) { *p++ = tbl[s[0] >> 2]; *p++ = tbl[((s[0] & 3) << 4) + (s[1] >> 4)]; *p++ = tbl[((s[1] & 0xf) << 2) + (s[2] >> 6)]; *p++ = tbl[s[2] & 0x3f]; s += 3; } /* Pad the result if necessary... */ if (i == length + 1) *(p - 1) = '='; else if (i == length + 2) *(p - 1) = *(p - 2) = '='; /* ...and zero-terminate it. */ *p = '\0'; return p - b64store; } #define IS_ASCII(c) (((c) & 0x80) == 0) #define IS_BASE64(c) ((IS_ASCII (c) && base64_char_to_value[c] >= 0) || c == '=') /* Get next character from the string, except that non-base64 characters are ignored, as mandated by rfc2045. */ #define NEXT_BASE64_CHAR(c, p) do { \ c = *p++; \ } while (c != '\0' && !IS_BASE64 (c)) /* Decode data from BASE64 (assumed to be encoded as base64) into memory pointed to by TO. TO should be large enough to accomodate the decoded data, which is guaranteed to be less than strlen(base64). Since TO is assumed to contain binary data, it is not NUL-terminated. The function returns the length of the data written to TO. -1 is returned in case of error caused by malformed base64 input. */ int base64_decode (const char *base64, char *to) { /* Table of base64 values for first 128 characters. Note that this assumes ASCII (but so does Wget in other places). */ static short base64_char_to_value[128] = { -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, /* 0- 9 */ -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, /* 10- 19 */ -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, /* 20- 29 */ -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, /* 30- 39 */ -1, -1, -1, 62, -1, -1, -1, 63, 52, 53, /* 40- 49 */ 54, 55, 56, 57, 58, 59, 60, 61, -1, -1, /* 50- 59 */ -1, -1, -1, -1, -1, 0, 1, 2, 3, 4, /* 60- 69 */ 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, /* 70- 79 */ 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, /* 80- 89 */ 25, -1, -1, -1, -1, -1, -1, 26, 27, 28, /* 90- 99 */ 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, /* 100-109 */ 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, /* 110-119 */ 49, 50, 51, -1, -1, -1, -1, -1 /* 120-127 */ }; const char *p = base64; char *q = to; while (1) { unsigned char c; unsigned long value; /* Process first byte of a quadruplet. */ NEXT_BASE64_CHAR (c, p); if (!c) break; if (c == '=') return -1; /* illegal '=' while decoding base64 */ value = base64_char_to_value[c] << 18; /* Process scond byte of a quadruplet. */ NEXT_BASE64_CHAR (c, p); if (!c) return -1; /* premature EOF while decoding base64 */ if (c == '=') return -1; /* illegal `=' while decoding base64 */ value |= base64_char_to_value[c] << 12; *q++ = value >> 16; /* Process third byte of a quadruplet. */ NEXT_BASE64_CHAR (c, p); if (!c) return -1; /* premature EOF while decoding base64 */ if (c == '=') { NEXT_BASE64_CHAR (c, p); if (!c) return -1; /* premature EOF while decoding base64 */ if (c != '=') return -1; /* padding `=' expected but not found */ continue; } value |= base64_char_to_value[c] << 6; *q++ = 0xff & value >> 8; /* Process fourth byte of a quadruplet. */ NEXT_BASE64_CHAR (c, p); if (!c) return -1; /* premature EOF while decoding base64 */ if (c == '=') continue; value |= base64_char_to_value[c]; *q++ = 0xff & value; } return q - to; } #undef IS_ASCII #undef IS_BASE64 #undef NEXT_BASE64_CHAR /* Simple merge sort for use by stable_sort. Implementation courtesy Zeljko Vrba with additional debugging by Nenad Barbutov. */ static void mergesort_internal (void *base, void *temp, size_t size, size_t from, size_t to, int (*cmpfun) PARAMS ((const void *, const void *))) { #define ELT(array, pos) ((char *)(array) + (pos) * size) if (from < to) { size_t i, j, k; size_t mid = (to + from) / 2; mergesort_internal (base, temp, size, from, mid, cmpfun); mergesort_internal (base, temp, size, mid + 1, to, cmpfun); i = from; j = mid + 1; for (k = from; (i <= mid) && (j <= to); k++) if (cmpfun (ELT (base, i), ELT (base, j)) <= 0) memcpy (ELT (temp, k), ELT (base, i++), size); else memcpy (ELT (temp, k), ELT (base, j++), size); while (i <= mid) memcpy (ELT (temp, k++), ELT (base, i++), size); while (j <= to) memcpy (ELT (temp, k++), ELT (base, j++), size); for (k = from; k <= to; k++) memcpy (ELT (base, k), ELT (temp, k), size); } #undef ELT } /* Stable sort with interface exactly like standard library's qsort. Uses mergesort internally, allocating temporary storage with alloca. */ void stable_sort (void *base, size_t nmemb, size_t size, int (*cmpfun) PARAMS ((const void *, const void *))) { if (size > 1) { void *temp = alloca (nmemb * size * sizeof (void *)); mergesort_internal (base, temp, size, 0, nmemb - 1, cmpfun); } }